To install a wooden door box in the opening, it is not necessary to call an experienced craftsman at all. If you have the skills of using tools, then this process, if you have desire and free time, can be performed independently by saving a little money. And then you can also buy the harmonica doors in Novosibirsk, and also install it yourself.
What will be needed for this? Of course, the box itself. Also, some tools and products will be needed, such as screwdrivers, screws that are suitable for the size of the loop, simple pencil, ruler, construction level, nails, chisels and hammer. Moreover, it is not necessary to buy them, just ask someone for a while.
The main thing is that before starting installation, you need to make sure that the size of the box is comparable to the sizes of the doorway. To do this, the measurement is used on the spot with a roulette, ruler or a measurement tape, for which the box leans to the nails driven on the sides of the opening. Do not forget that between the doorway and the box there should be a gap of at least three millimeters on each side.
The box is mounted to the doorway using metal pins or nails, after which all the remaining cracks are filled with foam. After drying, it will be possible to start hanging the door. But it cannot be made without installation of loops that are mounted in the lower and upper part of the box.
The installation sites of the loops are preliminarily marked with a pencil, after which the necessary recesses are cut out using a chisel. This process is performed in stages, every five millimeters new measurements are made. The loop is attached to the box and the door leaf using screws.