Installing the toilet yourself is very simple. First you need to dismantle the old one, turning off the water supply before. As a rule, it is enough to close the tap on the eyeliner. Then it is necessary to remove the flexible hose, most often attached to the tank with plastic nuts. If the toilet is attached to the floor with bolts, then you just need to unscrew them. The toilet installed on the cement mortar will have to be shot down, and maybe you will have to sacrifice it with the foundation. Installation is in the reverse order. Some advise to lay wooden taffeta. Do
Install the toilet on our own
This is not worth it. It is better to fix it directly on the tile, drill holes in advance. Screw the bolts as strong as possible. The toilet joins the plum using a corrugated pipe. You only need to pre -lubricate the connected holes with a sealant. Then water eyeliner is joined with a flexible hose. Usually there are all gaskets, nuts in the set, so it’s difficult to get confused. After starting the water, leaks are checked, which will also be eliminated by sealant.