Modern gas speakers have a high level of safety, good design, and ease of use. To use the column, even matches are not needed (automatic arson will do everything yourself). Installing a gas column in an apartment – a responsible lesson and specialists should do this, but something can be done by yourself.
We are all adults and understand that jokes are bad with gas. In modern gas columns, the threat of an explosion is reduced. The safety is monitored by automation and in which case it will turn off the gas. Connect the gas column to the gas line. This part of the work is better to entrust the specialized service and sleep calmly later. But the rest of the work can be safely done on your own.
The installation of gas columns in the apartment is carried out in such a place that it is convenient to carry out an hood into a ready -made chimney. If the installation is carried out in a country house and there is no chimney, then it is necessary to carry out an asbestos pipe on the roof with a diameter of at least 120 mm. Moreover, the chimney should rise above the roof of at least 1 m (the higher – the better the craving). We place the column itself under the chimney so that the children do not reach it (as high as possible). The column with the chimney is combined with a corrugated metal pipe.
Connecting a gas column to water is not particularly different from connecting an electric water heater. In principle, it does not matter which pipes will be used (copper, metal -plast or polypropylene pipes), the main thing is that all the connections are made responsibly so as not to pay for the repair of neighbors from below. In the water supply system, it would not be bad to insert the filter, by the way, it will extend life to mixers.
In conclusion, all compounds are viewed for leakage (gas leaks can be detected using soapy solution). Make the first trial start. The new column will not turn on the first time, since there is still air instead of gas (as a rule, starting with the second or third attempt). At first, water may have an unpleasant smell of oil, after several minutes of work, the factory lubricant will be washed up and everything will return to normal.